Battery spot welding machine operating requirements and daily use precautions

1. Battery spot welding machine operating capability requirements

Make sure the workpiece is stable and firm when welding.

When spot welding, the fixed electrode should be perpendicular to the workpiece, and asymmetric electrode heads should not be used in production.

In production, direct surface contact with the workpiece spot welding machine around the working electrode or electrode holder should be avoided to avoid shunting and reducing the quality of spot welding technology.

Spot welding machine is used to weld mild steel, stainless steel and some non-ferrous metals. It can realize projection welding between plates,battery machine and can also realize projection welding of nuts and studs.

Spot welding machines are indispensable equipment for welding parts in automobiles, home appliance manufacturing, metal cabinets and other fields. There is no doubt about welding quality and performance. The new structural design takes into account operation,cell manufacture maintenance and environmental protection. The direct pressure mechanism has good follow-up performance and fast welding speed. The guide part is made of low-friction material. The solenoid valve is directly connected to the cylinder to speed up the action response speed, increase the dotting speed and reduce the loss of air movement. Long service life, low noise, pressure speed regulation function. The up and down speed of the indenter can be adjusted at will, reducing the impact when the welding object is pressurized.

2. Things to note when using the battery spot welder in daily life

Pay attention to the daily inspection work of the spot welding machine and be careful

Employees must have a dedicated equipment monitor, similar to a security administrator. Such personnel have a certain understanding of spot welding equipment, can judge whether the equipment is working properly, and have certain sensitivity to potential problems. Spot welders should not be ignored during routine inspections.

Pay attention to the technical support of the spot welding machine, and make all preparations for the work.

The spot welding machine production line must have sufficient technical support capabilities, because technology is irreplaceable, and skilled workers must be considered when upgrading equipment and procedures. Not all hardware upgrades are suitable for the current situation.

Pay attention to the working and living environment around the spot welding machine

Resistivity is an important performance indicator of spot welding machines. It not only depends on the type of metal, but also depends on the heat treatment shape, processing method and temperature of the metal. The spot welding machine has a large instantaneous current and is suitable for the high-current projection welding industry. It is well used in energy storage welding machines in various countries around the world because it has advantages that other equipment cannot match. Moreover, the supervisor of the spot welding machine should not only pay attention to the equipment working and hardware problems, but also check whether the operation is proper. Sometimes, if done incorrectly, it can cause damage to the device.

In short, for the daily safety protection of spot welding machines, we must pay attention to the fact that spot welding machine technology can support us, and pay attention to the working and living environment of spot welding machines. Inexpensive spot welding machines manage and standardize the materials used in the logistics and distribution of the assembly line. Usually in terms of ingredients, the production assembly line has special rhythm and dynamic development characteristics. Under long-term overload operation, machine learning equipment even increases The financial burden of unnecessary labor on social work researchers.